As an Amazon Associate, All Hour Pools earns from qualifying purchases. Prices and availability are subject to change.
In-Ground Pools
- Remove standing water and debris from the top of the cover before pulling it off, to keep leaves and dirt out of the pool.
- Reconnect the plumbing lines, remove winter plugs, and reinstall the pump and filter equipment.
- Refill the pool to normal operating level and run the filter system to circulate and catch debris.
- Test and rebalance the water chemistry once it’s circulating, then shock the pool before regular swimming.
Safety note: Check that all electrical equipment is dry and grounded properly before restoring power after a winter of storage.
Above-Ground Pools
- Reinstall the pump and filter equipment you stored over winter and reconnect all hoses and fittings.
- Remove the winter cover carefully, rinsing off debris rather than dragging it across the water.
- Top off the water level back to mid-skimmer height and prime the pump before starting the system.
- Retest the water and shock the pool, since sitting water typically needs a fresh sanitizer boost to open safely.
Safety note: Inspect hoses and fittings for cracks from winter storage before running the pump at full pressure.